DANLERS

 Designed and Manufactured in the UK

Open today from 07:45 - 16:00

+44 (0)1249 443377

Main Menu

PIR Occupancy Switches

BMINTPIR10M

Images shown are for illustration purposes only and may not be an exact representation of the product

BMINTPIR10M

Batten Mounted

Batten mounted PIR switch - 10m version DANLERS Batten mount passive infra-red occupancy switches (PIR) with ‘Intelligent’ Photocell can be mounted onto the end of lighting battens via the 20mm knock out. The switch includes the connection 20mm thread and 1m of wire tails to connect to the lighting ballast. BMINTPIR5M incorporates a passive infra-red quad sensor to detect movement of a warm body within the detection zone. On detecting movement, if the ambient light is dark enough, the PIR will switch the load on. The ambient threshold can be set by the user to between approximately 30 and 1000 lux via the LUX adjuster. BMINTPIR10M operates with “ACTIVE” Lux control. It constantly samples the ambient LUX level and will, even if the area is occupied, switch off the controlled lamps (if the lux rises above the user set threshold and remains there for the overlux timeout period). If the artificial lights are ON and the LUX then rises greater than the set threshold (plus the “stored calibrated hysteresis” – saved during calibration) the product will then switch the artificial lights off after a preset time delay. The calibration process removes the site specific addition of artificial light from any decision to switch the lights on/off.” This technology has a GB patent pending No: 1219746.3. BMINTPIR10M has user feedback including a ‘real time’ photocell status indicator: Green LED illuminated indicates sufficient ambient light - load turns off after threshold delay. If no more movement is detected within a certain time, then the PIR will switch off the load. The time can be set via the internal TIME adjuster to between 10seconds and 40 minutes. NOTE: It is advised that this product is only used in environments where some natural light is available. If NO natural light is available see BMPIR10M.

Add to enquiry

Specifications
Weatherproof

IP53 rating

Detection Range

Up to 10m

Detection Angle

112°

Time Lag

10 seconds to 40 minutes (adjustable)

Photocell Range

30 lux to 1000 lux (adjustable)

Loading

Up to 10 amps (2500W) of resistive loads. Up to 6 amps (1500W) of fluorescent loads. Up to 3 amps (750W) of electronic and wire wound transformer loads. Up to 2 amps (500W) of CFL, 2D lamps, LED Drivers and LED lamps and fittings.

Dimensions

120 x 50 x 36mm plus 1 metre wire tails

Dimensions
Product dimensions
120 x 50 x 36mm plus 1 metre wire tails
Detection Diagrams
Wiring Diagrams
Single BMINTPIR5M occupancy switch

Other Batten Mounted

BMINTPIR5M
+

BMINTPIR5M

BMINTPIR5M

BMINTPIRSP
+

BMINTPIRSP

BMINTPIRSP

BMINTPIRRH
+

BMINTPIRRH

BMINTPIRRH

BMPIR5M
+

BMPIR5M

BMPIR5M

BMPIR10M
+

BMPIR10M

BMPIR10M

BMPIRSP
+

BMPIRSP

BMPIRSP

BMPIRRH
+

BMPIRRH

BMPIRRH

BMEXPIR
+

BMEXPIR

BMEXPIR