MWCEFL
MWCEFL
Ceiling Flush Mounted
MWCEFL microwave presence detector is designed for the automatic switching of lighting, heating and air conditioning loads. These neat and unobtrusive models are ideal for flush mounting through suspended or plasterboard ceilings. The sensor detects movement within its range of detection by emitting low power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room. When movement is detected, the load switches on. If no more movement is detected within a certain time, the MWCEFL will switch the load off. This time lag (hold time) can also be set via the rotary switch. Upon detecting movement, if the ambient light is dark enough, MWCEFL will turn the load on. The ambient threshold can also be set by setting the rotary dial to the appropriate preset. If no more movement is detected within a pre-selected time, then MWCEFL will turn the load off. Product code: MWCEFL
Operating Voltage
220-240V 50Hz
Loading
Switches up to 400W of most types of load including LED Switches up to 1200W of resistive load
Detection Area
50 / 75 / 100%
Time lag range
5sec, 30sec, 1min, 5min, 10min, 30min
Photocell Range
2 lux - 50 lux (at the photocell) and inactive
Sensor Type
Microwave motion detection
Detection Range
12m x 6m maximum
Detection Angle
30º - 150º
Mounting Height
Up to 6m maximum
IP Rating
IP20
Operating Temperature
-20ºC to 60ºC
Dimensions
85 x 85 x 65mm
