Rotary and push dimmers

dp2d-250w-main

Low voltage push dimmers, 2 way.

For dimmable electronic transformer loads.
Dim lights to any brightness.

Product code: DP2D 250WIET

Download Installation Guide

Suitable for mains halogen* (e.g. GU10) lamps without the need for derating.

*Mains halogen lamps must have an integral thermal safety fuse.

Specification

Min. and Max. wattage: 40 – 250W / gang
Max. No. of transformers: 4/gang
Dimensions: 86 x 86 x 12mm, minimum wall box depth of 16mm
  • DimensionsOpen or Close
    86 x 86 x 12mm, minimum wall box depth of 16mm DP2D-DIMS
  • Wiring DiagramsOpen or Close

    1 way switching and dimming.

    wd26

    2-way circuits

    Existing 2-way circuit

    wd27

    Dimming circuits with 2-way switching
    The lights can be switched on and off and dimmed at the dimmer switch.

    At the other switch the lights can be switched on and off only, at the brightness level which is set by the dimmer switch.

    wd28

    OR

    wd29

    wd33

    Alternative dimming circuits with 2-way switching
    The lights can be switched on and off and dimmed at the dimmer switch.

    At the other switch the lights can be switched on and off only, at the brightness level which is set by the dimmer switch.

    wd34

    OR

    wd35

    Intermediate circuits

    Existing intermediate circuit

    wd30

    Dimming circuits with multi-way switching
    The lights can be switched on and off and dimmed at the dimmer switch.

    At the other switches the lights can be switched on and off only, at the brightness level which is set by the dimmer switch.

    wd31

    OR

    wd32

    wd36

    Alternative dimming circuits with multi-way switching
    The lights can be switched on and off and dimmed at the dimmer switch.

    At the other switches the lights can be switched on and off only, at the brightness level which is set by the dimmer switch.

    wd37

    OR

    wd38