Microwave presence detection switch


Download User Guide

IP67 rated Microwave presence detection switch.

Ideal for outdoor or indoor use the DAMW6A IP67 microwave presence detectors can be wall or ceiling mounted and are designed for the automatic switching of lighting, heating and air conditioning loads.

The sensor detects movement, within its range of detection, by emitting low power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room.

When movement is detected the load switches ON. If no more movement is detected within a certain time, then the DAMW6A IP67 will switch the load OFF. The time can be set via the internal dip switches.

Product code: DAMW6A IP67


This surface-mounted IP67 rated Microwave presence detection switch is ideal for solid walls or ceilings.





Up to 6 amps (1500W) of:
- Fluorescent lamps, high frequency or switch start
- Incandescent or mains halogen lamps
- Electronic or wire wound transformers
Up to 2 amps (500W) of low energy lamps: CFL, LED, 2D etc.
Up to 1 amp (250W) of metal halide lamps or fans.

Time lag range: 5sec (walk test), 30sec, 3min, 5min, 15min, 25min
Detection range: 8m x 5m maximum
Detection options: 10 / 30 / 50 / 75 / 100%
Detection angles: 30° to 150° according to detection %
Mounting height: 5m maximum
Dimensions: 110 x 110 x 65mm