EasyZAPP
Narrow detection: |
Spot detection: |
Wide detection: |
![]() |
Programmable High Bay Energy Saving Controls for Switching Applications This range of High Bay multi-functional controls is specifically designed for the automatic control of lighting loads in areas with demanding mounting heights such as factories, storage aisles, entrance halls and sports halls. They include a relay with special high surge contact material, so they are suitable for use with high bay LED lamps. Product codes: EZ HB ND, EZ HB SP and EZ HB WD |
App suitable for Android devices 4.3 or later.
Specification
Voltage | Suitable for mains voltage 100 - 260Vac, 50Hz (switch mode). |
Loading: |
10 amp (2500W) of Resistive loads. |
Minimum load: | 2W resistive, suitable for most energy saving lamps, LED’s and emergency fittings. |
Time Lag: | Can be easily adjusted by APP to individual requirement from 10 seconds to 23 hours 59 minutes 59 seconds |
Lux: | Enabled: 30 to 1000 lux and infinite lux (photocell inactive). |
Dimensions: | Device: 90mm diameter x 63mm Power Supply: 120 x 50x 32mm |
Additional Features
- Password protection
- Batch programming
- Up to 100m signal range
- ON / OFF override
- Easy to install
- Ideal for retrofit or new build
- DimensionsOpen or Close
Supplied with Telejack Connector to connect EasyZAPP device with its power supply - Detection DiagramsOpen or Close
- Wiring DiagramsOpen or Close
Single EZ HB (XX) - Batten Mount VariantsOpen or Close
Versions of the above controls are also available with batten mount fixings for mounting on the end of a lighting batten via the 20mm knock out. Complete with 1m tail leads.
Please contact us for further details.