Wall mounted override switch.
 |
Wall mounted override switch. For use with DANLERS PIR occupancy switches (3-wire versions only) or ControlZAPP devices to override automatic settings. It comprises a push button time lag switch and a rocker switch. Product code: WAOSW |
Override function options
The rocker switch is used to choose between leaving the lights (or other load) in AUTOMATIC mode (controlled by the DANLERS control), or overridden OFF. At any time the push button can be used to override the lights (or other load) ON temporarily, for the time lag which is set at the back of this product. The temporary override ON can be cancelled by a further press on the time lag push button.
Specification
| Temporary timed override: | 1-120 minutes (adjustable). |
| Maximum load: | 6 amps (1500W) of resistive loads. 6 amps (1500W) of fluorescent loads. 6 amps (750W) of electronic transformer loads. 3 amps (750W) wire wound transformer loads. 2 amps (500W) of CFL, 2D lamps, LED Drivers and LED lamps and fittings. 1 amp (250W) of fans. |
| Minimum load: | 2W of resistive. |
| Dimensions: | 86 x 86 x 10mm. Minimum wall box depth 35mm. |
- DimensionsOpen or Close
86 x 86 x 10mm. Minimum wall box depth 35mm. 
- Wiring DiagramsOpen or Close
WAOSW 
