ControlZAPP

ControlZAPP

Download Installation Guide

Download User Guide

Download Installation Guide

Download App

Programmable Energy Saving Control with Scheduling for Switching Applications

This multi-functional control can be mounted directly onto solid ceilings or a range of different mounting boxes.
Programmable by Android phone (4.3 or later) or tablet via Bluetooth Smart. It includes a relay with special high surge contact material, so they are suitable for use with high bay LED lamps.
Easy to configure interface enabling greater energy saving, safety and security.

Product code: CZCESR

 

App suitable for Android devices 4.3 or later.

 

Specification

Voltage Suitable for mains voltage 100 - 260Vac, 50Hz (switch mode).
Loading: 10 amp (2500W) of Resistive loads.
6 amp (1500W) of Fluorescent loads.
3 amp (750W) of Transformer loads.
Up to 2 amps (500W) of CFL, 2D lamps, LED Drivers and LED lamps and fittings.
Minimum load: 2W resistive, suitable for most energy saving lamps, LED’s and emergency fittings.
Detection range: 360 degrees with 8m diameter when mounted at a 2.4m ceiling height.
Time Lag: Can be easily adjusted by APP to individual requirement from 10 seconds to 23 hours 59 minutes 59 seconds
Short Visit Time: Can be easily adjusted by APP to individual requirement from 10 seconds to 23 hours 59 minutes 59 seconds
Lux: Enabled: 30 to 1000 lux and infinite lux (photocell inactive).
Sensitivity: Adjustable via APP.
Output: Mains switching or DALI switching functionality.
Dimensions: Device: 91mm diameter x 45mm
Power Supply: 120 x 50 x 32mm

 

Additional Features

  • Accurate ‘Real time’ clock with battery back up when powered off
  • Accurately timed override ON or OFF
  • Active or Passive PIR occupancy switching
  • Patented ‘Intelligent’ photocell calibration
  • Automatic Daylight Savings Time (BST) correction with offset adjustment
  • Automatic Sunrise / Sunset prediction. This feature can be remotely adjusted via APP.
  • Upload indicator to ensure successful programming.