ControlZAPP

ControlZAPP

Download User Guide

Download Installation Guide

Download App

Programmable Energy Saving Control with Scheduling for switching and dimming 1-10VDC ballasts

This multi-functional control can be mounted directly onto solid ceilings or a range of different mounting boxes. Programmable by Android phone (4.3 or later) or tablet via Bluetooth Smart. Easy to configure interface enabling greater energy saving, safety and security.
CZ CESR 10VDC is designed for use with 1-10VDC ballasts.

Product code: CZ CESR 10VDC

 

App suitable for Android devices 4.3 or later.

 

Specification

Voltage Suitable for mains voltage 100 - 260Vac, 50Hz (switch mode).
Loading:

Suitable for switching and dimming 1-10VDC ballasts. Can control up to 20mA, eg. 20 ballasts at 1mA (varies according to make and model of ballasts).

They can also switch up to:

  • 10 amps (3000W) of resistive loads
  • 6 amps (1500W) fluorescent lamps, high frequency or switch start, incandescent or mains halogen lamps (recommended with integral safety fuse)
  • 3 amps (750W) of electronic or wire wound transformers.
  • 2 amps (500W) of low energy lamps: CFL, LED drivers and LED lamps and fittings.
  • 1 amp (250W) of fans or most metal halide lamps
Detection range: 360 degrees with 8m diameter when mounted at a 2.4m ceiling height.
Time Lag: Can be easily adjusted by APP to individual requirement from 10 seconds to 23 hours 59 minutes 59 seconds
Short Visit Time: Can be easily adjusted by APP to individual requirement from 10 seconds to 23 hours 59 minutes 59 seconds
Lux: Enabled: 30 to 1000 lux. Can be also disabled.
Sensitivity: Adjustable via APP.
Dimensions: Device: 91mm diameter x 45mm
Power Supply: 120 x 50 x 32mm

 

Additional Features

  • Accurate ‘Real time’ clock with battery back up when powered off
  • Accurately timed override ON or OFF
  • Active or Passive PIR occupancy switching
  • Patented ‘Intelligent’ photocell calibration
  • Automatic Daylight Savings Time (BST) correction with offset adjustment
  • Automatic Sunrise / Sunset prediction. This feature can be remotely adjusted via APP.
  • Upload indicator to ensure successful programming.
  • LED indicator for presence recognition within its detection range (can be turned off).
  • Manual Group Control ON / OFF / RESUME feature on APP