|
|
|
TLSW 10 ILM (Time lag switches) |
|
|
2 wire version, no neutral wire is needed.
The time lag is adjustable from 1-10 minutes.
With illuminated push button.
This Time lag switch is a direct replacement for an existing wall switch. No neutral wire is needed, hence they are very quick and inexpensive to install.The TLSW 10 ILM has an illuminated push button for easy location in the dark. Alternative colour options for the illuminated push button are available, depending on order quantity. Please call us to discuss your requirements. |
|
|
|
| Specification |
| Time lag range: |
1 to 10 minutes |
| Maximum load: |
6 amps (1500W) of resistive, fluorescent or inductive lighting loads, or up to 1 amp (250W) of fans |
| Minimum load: |
40W resistive, or for wiring in parallel 40W per time lag switch in the circuit. Load capacitors (order code CAPLOAD) can be supplied to augment small or non-resistive loads |
| Dimensions (mm): |
86 x 86 x 12 |
| Wall box depth (mm): |
16 |
|
| Wiring diagrams |
|
|
| Dimensions (in mm) |
| Wall box depth 16mm |
|
 |
|
| e-mail: sales@danlers.co.uk |
Phone: +44 (0)1249 443377 |
Fax: +44 (0)1249 443388 |
|
