TLSW 10 (Time lag switches) - DANLERS Limited - Lighting Controls HVAC Controls

TLSW 10 (Time lag switches)

2 wire version, no neutral wire is needed.
The time lag is adjustable from 1-10 minutes.

This Time lag switch is a direct replacement for an existing wall switch. No neutral wire is needed, hence they are very quick and inexpensive to install.

Specification

Time lag range:	1 to 10 minutes
Maximum load:	6 amps (1500W) of resistive, fluorescent or inductive lighting loads, or up to 1 amp (250W) of fans
Minimum load:	40W resistive, or for wiring in parallel 40W per time lag switch in the circuit. Load capacitors (order code CAPLOAD) can be supplied to augment small or non-resistive loads
Dimensions (mm):	86 x 86 x 12
Wall box depth (mm):	16

Wiring diagrams

Single TLSW 10

Several TLSW 10 wired in parallel e.g. in a stairwell

TLSW 10 with slave push buttons

For alternative wiring diagrams for DANLERS time lag switches click here

Dimensions (in mm)

Wall box depth 16mm

e-mail: sales@danlers.co.uk

Phone: +44 (0)1249 443377

Fax: +44 (0)1249 443388