Home Products Literature Trade price list Contact details
	CESF PIR(PIR occupancy switches)
Order code: CESF PIR	Ceiling surface-mounted PIR switch. These surface-mounted PIR switches are ideal for solid ceilings. The CESF PIR is hard wired, and can be mounted on a square pattress box. Can be mounted on a square pattress box Order code: PABO
	Specification
	Detection zone: 360º Time lag range: 10 seconds to 40 minutes in 9 steps Photocell range: 100 to 1000 lux, and inactive Loading: up to 6 amps (1500W) of resistive, fluorescent or inductive lighting loads, or up to 1 amp (250W) of fans Dimensions (mm): 86 x 86 x 22
	Detection diagrams
	Ceiling mounted PIR occupancy switch For optimum coverage recommended mounting height between 2.4 and 5m Several PIR occupancy switches In open plan areas. For best coverage the PIR occupancy switches should be spaced every 5m in either direction
	Wiring diagrams
	Single CESF PIR A few CESF PIR wired in parallel
	Start-up mode When the mains supply is initially connected to the PIR occupancy switch it goes through its Start-up Mode. This means it switches on for about 1 minute, then switches off and enters its Operating Mode. If a manual wall switch is feeding the PIR occupancy switch (see wiring diagrams on appropriate product pages) then it will go through the Start-up Mode each time the wall switch is switched on. By wiring the manual wall switch in the alternative position, the supply to the PIR occupancy switch is uninterrupted and it remains in Operating Mode. It does not go through its Start-up Mode each time the wall switch is switched on.
	Dimensions (in mm)
e-mail: sales@danlers.co.uk Phone: +44 (0)1249 443377 Fax: +44 (0)1249 443388