|
|
|
CEFLP PIR (PIR occupancy switches) |
|
|
Ceiling flush-mounted PIR switch, plug and socket version.
These neat and unobtrusive models are ideal for flush mounting through false or plasterboard ceilings.
Provided with a plug suitable for the CESO Ceiling socket. |
 |
 |
|
Ceiling socket
for CEFLP PIR
Order code:
CESO |
|
| Specification |
| Detection zone: |
360º |
| Time lag range: |
10 seconds to 40 minutes in 9 steps |
| Photocell range: |
100 to 1000 lux, and inactive |
| Loading: |
up to 6 amps (1500W) of resistive, fluorescent or inductive lighting loads, or up to 1 amp (250W)
of fans |
| Dimensions (mm): |
72 diameter x 68 |
|
| Detection diagrams |
|
|
|
|
|
| Wiring diagrams |
| Single CEFLP PIR |
|
 |
|
|
|
A few CEFLP PIR
wired in parallel |
|
 |
|
|
Start-up mode
When the mains supply is initially connected to the PIR occupancy switch
it goes through its Start-up Mode. This means it switches on for about
1 minute, then switches off and enters its Operating Mode. If a manual wall switch is feeding the PIR occupancy switch (see wiring diagrams on appropriate product pages) then it will go through the Start-up Mode each time the wall switch is switched on. By wiring the manual wall switch in the alternative position, the supply to the PIR occupancy switch is uninterrupted and it remains in Operating Mode. It does not go through its Start-up Mode each time the wall switch is switched on. |
| Dimensions (in mm) |
| Requires 63 or 64mm (2.5") diameter hole in a false or plasterboard ceiling |
|
 |
|
| e-mail: sales@danlers.co.uk |
Phone: +44 (0)1249 443377 |
Fax: +44 (0)1249 443388 |
|
