CELO

Ceiling surface-mounted plug-in PIR occupancy switch

celo-main

Download Installation Guide
celo-main-1
 

Ceiling surface-mounted
plug-in PIR switch.

These surface-mounted models are ideal for solid ceilings.

The CELO has a built-in plug suitable for the CESO SQ Ceiling socket (or CESO Ceiling socket). CESO SQ can be mounted on a square pattress box (the CESO can be mounted on a BESA box).

Product code: CELO

Requires socket order code: CESO SQ or CESO

 

Specification

Detection Zone: 360°
Time lag range: 10 seconds to 40 minutes in 9 steps
Photocell range: 30 to 1000 lux, and inactive
Loading: Up to 6 amps (1500W) of resistive loads.
Up to 6 amps (1500W) of fluorescent loads.
Up to 3 amps (750W) of electronic and wire wound transformer loads.
Up to 2 amps (500W) of CFL, 2D lamps, LED Drivers and LED lamps and fittings.
Up to 1 amp (250W) of fans.
Dimensions: 86 x 86 x 47mm. Requires back box depth 16mm

 

 

  • DimensionsOpen or Close
    CELO  celo-dimensions
  • Detection DiagramsOpen or Close

    icn-detection-strongStrong detection zone
    ie. person moving arm

    icn-detection-secondarySecondary detection zone
    ie. person walking (less sensitive when walking straight towards PIR switch)

    PIR Quad detector gives 124 detection areas within the zone

    		 celo-detection-diagram-1

    Perspective view of detection zone

    For optimum coverage recommended mounting height between 2.4 and 5m

    		 celo-detection-diagram-2

    Several PIR occupancy switches

     

    In open plan areas

    For best coverage the CELO should be spaced every 5m in either direction

    		 celo-detection-diagram-3
  • Wiring DiagramsOpen or Close
    Single CELO wd16a
    A few CELO wired in parallel wd16b
    Ceiling mounted socket (CESO SQ or CESO) wd16c