Microwave presence detection switch


Download User Guide

IP67 rated Microwave presence detection switch - 2 channel.

Ideal for outdoor or indoor use the MW6A2C IP67 microwave presence detectors can be wall or ceiling mounted and are designed for the automatic switching of lighting, heating and air conditioning loads.

The sensor detects movement, within its range of detection, by emitting low power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room.

When movement is detected the load switches ON. If no more movement is detected within a certain time, then the MW6A2C IP67 will switch the load OFF. The time can be set via the internal dip switches.

Two channels for switching two separate circuits. Can also be wired to control two volt free circuits.

Product code: MW6A2C IP67


This surface-mounted IP67 rated Microwave presence detection switch is ideal for solid walls or ceilings.




Total Loading:

MW6A2C IP67 can switch up to 10 amps (2500W) total load of:

  • Fluorescent lamps, either high frequency or switch start.
  • Incandescent or mains halogen lamps (recommended with integral safety fuse).

MW6A2C IP67 can also switch (total load) up to:

  • 6 amps (1500W) electronic or wire wound transformers.
  • 6 amps (1500W) compact fluorescent or LEDs and drivers (PF >0.95), 2D etc.
  • 1 amp (250W) of fans.

Larger loads can be switched via a contactor.

Time lag range: 5sec (walk test), 30sec, 1min, 5min, 20min, 30min
Detection range: 12m x 6m maximum
Detection options: 10 / 30 / 50 / 75 / 100%
Detection angles: 30° to 150° according to detection %
Mounting height: 6m maximum
IP rating: IP20
Operating temperature: tamb -30ºC....+70ºC
Dimensions: 110 x 110 x 65mm