Microwave presence detection switch
|
IP67 rated Microwave presence detection switch.Ideal for outdoor or indoor use the MW2A IP67 microwave presence detectors can be wall or ceiling mounted and are designed for the automatic switching of lighting, heating and air conditioning loads. The sensor detects movement, within its range of detection, by emitting low power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room. When movement is detected the load switches ON. If no more movement is detected within a certain time, then the MW2A IP67 will switch the load OFF. The time can be set via the internal dip switches. Product code: MW2A IP67 |
This surface-mounted IP67 rated Microwave presence detection switch is ideal for solid walls or ceilings.
Specification
| Loading: |
Switches up to 2 amps (500W) of most types of load |
| Time lag range: | 5sec (walk test), 30sec, 1min, 5min, 20min, 30min |
| Detection range: | 12m x 6m maximum |
| Detection options: | 10 / 30 / 50 / 75 / 100% |
| Detection angles: | 30° to 150° according to detection % |
| Mounting height: | 6m maximum |
| Operating temperature: | tamb -30ºC....+70ºC |
| Dimensions: | 110 x 110 x 65mm |
- DimensionsOpen or Close
110 x 110 x 65mm.
25mm glanded entry or a 20mm entry via the supplied adaptor.
- Detection DiagramsOpen or Close
Detection diagrams
- Wiring DiagramsOpen or Close
Single MW2A IP67 switch 
